Editing Warp Core

Jump to: navigation, search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 265: Line 265:
22nd century warp cores were designed as oblong cylinders connected by pylon conduits directly into the warp nacelles. In the 23rd century, the main warp reaction occurred in a dilithium crystal converter assembly which consisted of two flattened rounded nodules situated directly in front of the warp plasma conduits to the warp engines which were behind a large metal grate. By 2270, most Federation warp cores were redesigned to consist of a large warp core unit in the secondary hull with matter and anti-matter channeling into the core through vertical conduits then the energy directed to the nacelles through a horizontal conduit leading out from the rear of the core. (Star Trek: The Motion Picture)
22nd century warp cores were designed as oblong cylinders connected by pylon conduits directly into the warp nacelles. In the 23rd century, the main warp reaction occurred in a dilithium crystal converter assembly which consisted of two flattened rounded nodules situated directly in front of the warp plasma conduits to the warp engines which were behind a large metal grate. By 2270, most Federation warp cores were redesigned to consist of a large warp core unit in the secondary hull with matter and anti-matter channeling into the core through vertical conduits then the energy directed to the nacelles through a horizontal conduit leading out from the rear of the core. (Star Trek: The Motion Picture)


:'''''The vertical warp core was never seen in Star Trek: The Original Series (although there was one in TAS in what seemed to be a modification). During this time, main engineering contained two flattened nodules, situated directly in front of a large metal grate, which were shown as key components of the warp drive (likely to be warp plasma conduits to the warp engines). There may have been a warp core below decks but was never seen on screen. The vertical warp core's first appearance was in Star Trek: The Motion Picture and was seen in all subsequent Star Trek productions set after TOS. ''''
    The vertical warp core was never seen in Star Trek: The Original Series (although there was one in TAS in what seemed to be a modification). During this time, main engineering contained two flattened nodules, situated directly in front of a large metal grate, which were shown as key components of the warp drive (likely to be warp plasma conduits to the warp engines). There may have been a warp core below decks but was never seen on screen. The vertical warp core's first appearance was in Star Trek: The Motion Picture and was seen in all subsequent Star Trek productions set after TOS.  


As a safety precaution, the core can be physically ejected from the ship should an event such as the catastrophic failure of the containment of the matter-antimatter reaction occur and the crew decides it cannot be corrected. (TOS: "That Which Survives"; TNG: "Cause and Effect")
As a safety precaution, the core can be physically ejected from the ship should an event such as the catastrophic failure of the containment of the matter-antimatter reaction occur and the crew decides it cannot be corrected. (TOS: "That Which Survives"; TNG: "Cause and Effect")
Line 366: Line 366:
Doctor Leah Brahms inspected the dilithium articulation frame of the USS Enterprise-D in 2367 and discovered that Geordi La Forge had modified the articulation frame. (TNG: "Galaxy's Child")
Doctor Leah Brahms inspected the dilithium articulation frame of the USS Enterprise-D in 2367 and discovered that Geordi La Forge had modified the articulation frame. (TNG: "Galaxy's Child")


The frame suspends the dilithum in the reaction chamber using a field effect to keep the crystal faces in alignment with the matter/antimatter streams. The correct alignment of the crystal faces and planes maximizes the efficiency of the plasma conversion that takes place. By the 2360s, the theta-matrix compositor was integrated with the articulation frame, allowing recrystallization to take place in the warp core with the core online. (TNG: "Relics")
The frame suspends the dilithum in the reaction chamber using a field effect to keep the crystal faces in alignment with the matter/antimatter streams. The correct alignment of the crystal faces and planes maximizes the efficiency of the plasma conversion that takes place. By the 2360s, the theta-matrix compositor was integrated with the articulation frame, allowing recrystallization to take place in the warp core with the core online. (TNG: "Relics")  
 
==Matter Injector/Deuterium injector==
==Matter Injector/Deuterium injector==
The deuterium injector, or simply matter injector, is a component of starship's warp core, which precisely compresses and streams matter (deuterium) into the form which enters the dilithium articulation frame.
The deuterium injector, or simply matter injector, is a component of starship's warp core, which precisely compresses and streams matter (deuterium) into the form which enters the dilithium articulation frame.
Please note that all contributions to Star Trek : Freedom's Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Project:Copyrights for details). Do not submit copyrighted work without permission!
Cancel Editing help (opens in new window)